Contents
This step-by-step guide will teach you how to build a swimming pool in your backyard. We’ll cover everything from choosing the right location to digging the hole to filling it with water.
Checkout this video:
Decide where to build your pool
Before you begin digging or ordering materials, you need to decide where to build your pool. It’s important to consider several factors when choosing the location, such as:
-Soil type
-Drainage
-Sunlight
-Privacy
– proximity to utilities
Once you’ve selected the perfect spot, you’ll need to get approvals from your homeowners association (if applicable) and your local building department. You may also need a permit to build a pool, so be sure to check with your local authorities before proceeding.
Choose the type of pool you want
One of the first decisions you’ll make when planning to build a swimming pool is deciding which type of pool you want. In-ground pools are permanent structures that are built into the ground, while above-ground pools are notpermanent and can be moved if necessary.
There are pros and cons to both types of pools, so it’s important to weigh your options before making a decision. In-ground pools are more expensive and require more maintenance than above-ground pools, but they also last longer and offer more customization options. Above-ground pools are less expensive and easier to install, but they’re not as durable as in-ground pools and they don’t offer as many customization options.
Once you’ve decided which type of pool you want, you can start planning the details of your project. If you’re building an in-ground pool, you’ll need to excavate the area where the pool will be located and pour concrete into the hole. You’ll also need to install the plumbing and electrical systems for the pool. Above-ground pools can be easier to install because they don’t require excavation, but you’ll still need to level the ground where the pool will be located and install the plumbing and electrical systems.
Decide whether to DIY or hire a professional
One of the first decisions you’ll need to make when it comes to building a swimming pool is whether to DIY or hire a professional. Depending on the size and type of pool you want, as well as your own construction experience and confidence, this can be a tricky decision.
There are pros and cons to both approaches. Hiring a professional will obviously cost more, but it also means that you’ll have less work to do yourself and the job will (in theory) be done faster and to a higher standard. If you’re set on building the pool yourself, make sure you do your research first and have a realistic idea of the time, effort and cost involved.
Obtain the necessary permits
Building a swimming pool without the proper permits can lead to hefty fines, or even cause you to have to tear down your pool. To avoid these complications, make sure to check with your local building department to see what permits are required in your area. Once you have the appropriate permits, you can move on to the next step.
excavate the area for your pool
Before you can begin construction on your in-ground pool, you need to excavate the area where it will be built. This is a big job, and unless you have experience with excavation, it’s best to hire a professional to do it for you.
Once the area has been excavated, you’ll need to put up some walls. Again, unless you have experience with construction, it’s best to hire a professional to do this for you.
Once the walls are up, you’ll need to fill the pool with water. This is an important step, as you don’t want your pool to be empty when it’s time to swim!
Install the pool liner
The average cost to install a pool liner is $450 to $550. Installation costs will vary depending on the size and type of liner you choose. If you have an inground pool, you will need to purchase a vinyl or fiberglass pool shell to pour concrete around. The shell will then need to be covered with a liner. An inground pool with a concrete shell will cost between $15,000 and $30,000.
To install a pool liner:
1. Remove the old liner from the pool if necessary. Use a putty knife to scrape off any old adhesive and caulking from the coping and walls of the pool.
2. Place the new liner in the pool. Start at one end and work your way around, smoothing out any wrinkles as you go.
3. Once the liner is in place, trim off any excess material with a utility knife.
4. Install the coping strips around the edge of the pool, being sure to seal them with caulking or adhesive. This will help hold the liner in place and prevent it from being damaged by sharp edges.
5 Fill the pool with water following manufacturer’s instructions carefully so that you do not damage the liner
Fill the pool with water
Building a swimming pool is a big undertaking, but it’s also a great way to add value to your home and get in shape. If you’re up for the challenge, follow these steps to build your own pool.
1. Fill the pool with water. The first step is to fill the pool with water. This can be done with a garden hose or by filling buckets and pouring them into the pool.
2. Add the walls. Once the pool is full, it’s time to add the walls. This can be done with wood, metal, or plastic panels. Be sure to level the walls so that they’re evenly distributed around the pool.
3. Add the flooring. The next step is to add the flooring. This can be done with tiles, concrete, or liner material. Be sure to level the flooring so that it’s evenly distributed around the pool.
4. Finish up. Once the flooring is in place, it’s time to finish up by adding stairs, handrails, and other features as desired.
Add the finishing touches
After the pool has been filled with water, you can add the finishing touches, such as ladders, diving boards, slides, and other accessories. You will also need to install a pump and filter system to keep the water clean and circulating.
